KHIA headerKnow-How in Action

VOL XIX, NO 17

Belzona, The Alternative To Welding In Difficult Situations

 
 

Industry:

General Industry (GIND)

 
 

Application:

Tanks and Chemical Containment Areas (TCC)

 
 

Customer Location:

Vegetable Oil Processor - Liverpool, UK

 
 

Application Date:

March 2005

 
 

Application Situation:

Five-meter diameter storage tank - carbon steel construction

 
 

Problem:

The tank was experiencing classic Corrosion Under Insulation caused by water ingress that was sitting on the lagging bands around the tank and soaking through the lagging. The problem was further exascerbated by the elevated temperature of the tank. Problem made still worse by the lining material being highly volatile requiring a Nitrogen shroud before and during any potential welding operations.

 
 

Products:

Belzona® 1111 (Super Metal)

 

Substrate:

Carbon Steel

 
 

Application Method:

Application was carried out in accordance with with Belzona Know-How System Leaflet TCC-1.

 
 

Belzona Facts:

Customer's previous experience had proven that welding was very costly and time consuming due to the flammable nature of the lining material. The Belzona repair was done in one-third of the time and for half the cost, giving an overall savings of over £4,000 ($7500).

 
 

Photographs Description

  1. Scenic view of the tank farm. 
  2. Damage to tank wall. 
  3. The Belzona repair. After surface preparation to acheive profile the profiled plates were bonded in place with a fillet of Belzona material between them to allow excess water to run off. 
  4. Close up of repair area.
 
Case study pic one

 

 
 Case study pic two

 

 
 Case study pic three

 

 
 Case study pic four

 

 
 
For more information about Belzona visit: www.belzona.com