| Belzona 1331 Rebuilds Turbine Cover In The Hydro Power Industry | | | Industry:Power (POWR) | | | Application:Valves, Pipes and Fittings (VPF) | | | Customer Location:Austria | | | Application Date:March 2021 | | | Application Situation:An International Hydro Power client needed Belzona to rebuild an area of a turbine cover. | | | Problem:The turbine cover became oval due to welding work on the outer circumference. The fits on the inside diameter also warped. Since these surfaces already had their finished diameter, they should be built up with Belzona and then machined to the finished size. | | | Products:Belzona 1331 | | | Substrate:Steel | | | Application Method:Blasted to 110 µm roughness according to Testex with blasting agent Sintox 0.2-1.4 and corundum F14 (mixed 2: 1) Cleaned and degreased surfaces Build up the surfaces with the first layer of Belzona 1331 - target layer thickness 1000 µm Build up the mating surfaces with a second layer of Belzona 1331 after approx. 3 hours - target layer thickness 1000 µm Build up the mating surfaces with a third layer of Belzona 1331 after approx. 3 hours - target layer thickness 1000 µm in accordance with Belona System Leaflet VPF_13 | | | Belzona Facts:The client had already used welding as a procedure which had failed and became oval on the outer circumference. | | | Photographs DescriptionImage 1: Turbine Cover
Image 2: Identifying the issues 1: Worn ring (traces of erosion from the water) 2: Mating surfaces were coated in 3 layers 3: The undercut was coated in a single layer
Image 3: The lid after applying the first coat of Belzona 1331
Image 4: Completed application after being machined. | |
| |