BELZONA PREVENTS GALVANIC AND CREVICE CORROSION ON RUDDER HORN

KHIA ID: 367
Industry: Marine (MRNE)
Application: SOS-Ships and Offshore Structures (SOS)
Substrate: Carbon Steel and Bronze
Customer Location: Oil shipping company
Application Date: 1988
Products:

Belzona® 1321 (Ceramic S-Metal)

Belzona® 1211 (E-Metal)


Problem: Corrosion to internal of rudder horn had allowed the press fitted bronze bearing to become free. Bearing was approximately 908-mm (36-inch) diameter and 1050-mm (41-inch) long.
Photograph Descriptions
  1. Belzona materials and team prepared for application. 
  2. Internal shot of bearing. Note arrows for injection ports. 
  3. Bearing after injection and prior to cleaning up of the Belzona® 1211 seal.
Application Situation
Corrosion to internal of rudder horn of 280,000 Ton VLCC (Very Large Crude Carrier) required re-fixing of bearing.
Application Method
The bearing was aligned and its position in the housing fixed using alignment bolts.The top and bottom of the housing were sealed using Belzona® 1211, then Belzona® 1321 was injected from below.
Belzona Facts
This method is used both in new-build and repair, and this example illustrates the ability to undertake this work while the vessel is afloat. Use of Belzona materials isolates and permanently fixes the bearing into position preventing galvanic and crevice corrosion.